Energy technology profile
Small modular reactors
Small modular reactors package a lower-output fission system around repeatable modules and factory-oriented construction. The category includes several coolants, fuels, and neutron spectra rather than one design.
Technical deep dive
How it works
Like larger reactors, an SMR maintains a controlled fission chain reaction and removes the resulting heat with a coolant. Compact integral layouts can place major primary-system components inside one vessel, while passive systems use gravity, natural circulation, and stored inventories to respond to faults. The economic case depends on repeating a standardized design often enough for manufacturing and project learning to offset the loss of scale per unit.
What is—and is not—an SMR
The IAEA commonly uses up to 300 MWe per module as the small-reactor boundary. Modular refers to factory fabrication, transportable subassemblies, repeated modules, or staged capacity—not simply low output. Designs include pressurized-water reactors, boiling-water reactors, gas-cooled reactors, sodium or lead fast reactors, molten-salt concepts, and microreactors, so no single coolant, fuel, or safety case describes the entire class.
An integral pressurized-water SMR places the core, steam generators, and pressurizer inside or immediately around one reactor vessel. Shortening or eliminating large primary coolant pipes reduces large-break loss-of-coolant pathways. Natural circulation, gravity-fed inventories, stored heat capacity, and passive heat exchangers can extend coping time without powered pumps.
Neutronics, heat removal, and modular operation
Fission control remains conventional: delayed neutrons make the chain reaction controllable, soluble absorbers or control rods adjust reactivity, and shutdown does not eliminate decay heat. Smaller cores have greater surface area relative to power, which can help passive heat rejection, but leakage and fuel utilization differ from large cores. Multiple modules may share turbines, control rooms, cooling, security, and site infrastructure.
Load following depends on the reactor design and steam system. A site can vary total output by changing individual modules or by diverting heat to storage, hydrogen, or industrial loads. Common facilities reduce unit cost but can also create shared-system dependencies that must be treated in licensing and reliability analysis.
The economic hypothesis
Large reactors buy less equipment per megawatt; SMRs try to recover that scale penalty through design standardization, factory learning, shorter site work, repeat orders, and incremental financing. The outcome depends on production volume, supplier qualification, transport limits, interest during construction, owner staffing, and how much infrastructure modules share.
A regulatory design approval establishes that a reference design can satisfy a regulator's safety requirements. It does not establish construction cost, schedule, capacity factor, fuel availability, or demand. Those require completed projects and repeated operation.
Reason to use it
What could make it valuable
Smaller increments may fit more grids and industrial sites, while repeatable factory production could eventually reduce construction uncertainty.
Unresolved engineering
What still blocks it
The benefits depend on licensing, manufacturing volume, supply chains, financing, fuel availability, and delivered cost—not simply making a reactor smaller.
They may fit smaller grids and incremental projects, but licensing, financing, supply chains, construction learning, and cost per delivered megawatt remain decisive.
Monthly evidence layer
Research watch
Named programs, dated developments, and primary or official sources. Company claims are identified separately from independent or peer-reviewed evidence.
Last reviewed 6 September 2026
Research groups & programs
- U.S. Nuclear Regulatory Commission — advanced reactors
Safety review and licensing records for domestic SMR applicants.
- International Atomic Energy Agency — SMR platform
Design status, safety, economics, deployment, and international harmonization.
Current developments
May 2025
NRC completed the NuScale US460 standard-design reviewThe approval covers a six-module, 462 MWe reference plant. Project construction and commercial performance remain separate steps.
Current frontier
Attention is moving from design claims to delivery evidenceThe decisive evidence will be licensed construction, repeated component manufacture, completed schedules, fuel qualification, and operating data.
Papers & official resources
- official resourceNuScale US460 standard design approval
U.S. Nuclear Regulatory Commission · 2025
- official resourceSmall modular reactors
International Atomic Energy Agency · current